5. Select the user or group.
6. Press [Protection].
7. Under "Protect File(s)", press [Program/Change/Delete] for "Permissions for Users/
Groups".
If the setting to be specified does not appear, press [ Next] to scroll down to other settings.
8. Press [New Program].
9. Select the users or groups to register.
You can select more than one user.
By pressing [All Users], you can select all the users.
10. Press [Exit].
11. Select the user who you want to assign access permission to, and then select the permission.
Select the access permission from [Read-only], [Edit], [Edit / Delete], or [Full Control].
12. Press [Exit].
13. Press [OK].
14. Press [Exit].
15. Press the [User Tools/Counter] key.
• p.34 "Logging on Using Administrator Authentication"
Specifying Access Permission for Stored Files
111
To Next Page
Loading...
Need help?
General
