4. Click [Configuration], and then click [Device Certificate] under "Security".
5. Check the radio button next to the number of the certificate you want to create.
6. Click [Create].
7. Make the necessary settings.
8. Click [OK].
The setting is changed.
9. Click [OK].
A security warning dialog box appears.
10. Check the details, and then click [OK].
"Installed" appears under Certificate Status to show that a device certificate for the printer has been
installed.
11. Click [Logout].
• Click [Delete] to delete the device certificate from the machine.
Creating the Device Certificate (Certificate Issued by a Certificate Authority)
This can be specified by the network administrator.
Create the device certificate using Web Image Monitor. For details about the displayed and selectable
items and settings, see Web Image Monitor Help.
Use this procedure to create a device certificate issued by a certificate authority.
1. Open a Web browser.
2. Enter "http://(the machine's IP address or host name)/" in the address bar.
When entering an IPv4 address, do not begin segments with zeros. For example: If the address is
"192.168.001.010", you must enter it as "192.168.1.10" to connect to the machine.
The top page of Web Image Monitor appears.
3. Click [Login].
The network administrator can log on.
Enter the login user name and login password.
4. Click [Configuration], and then click [Device Certificate] under "Security".
The Device Certificate page appears.
5. Check the radio button next to the number of the certificate you want to request.
6. Click [Request].
7. Make the necessary settings.
Using S/MIME to Protect Email Transmission
121
To Next Page
Loading...
Need help?
General
