• When Auto Erase Memory is set to [On], temporary data that remained on the hard disk when Auto
Erase Memory was set to [Off] might not be overwritten.
1. Press the [User Tools/Counter] key.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [ Next] repeatedly until [Auto Erase Memory Setting] appears.
5. Press [Auto Erase Memory Setting].
6. Press [On].
7. Select the method of overwriting.
If you select [NSA] or [DoD], proceed to step 10.
If you select [Random Numbers], proceed to step 8.
For details about the methods of overwriting, see "Methods of Overwriting".
8. Press [Change].
Deleting Data on the Hard Disk
137
To Next Page
Loading...
Need help?
General
