3. Select the connection type.
Press [NDS] to specify a folder in the NDS tree.
Press [Bindery] to specify a folder on the NetWare Bindery server.
4. Press [Browse Network] under the path name field.
If you selected [NDS] under [Connection Type], the NDS tree list appears.
If you selected [Bindery] under [Connection Type], the NetWare Bindery server list appears.
5. Search for the destination folder in the NDS tree or NetWare Bindery server.
If you cannot find the destination folder, press [Up One Level], and then search for the folder at that
level.
6. Select the destination folder.
7. Press [OK] twice.
• If you change the protocol after entering the path name, user name, or password, a confirmation
message appears.
• Only folders that you have the read privileges for are displayed.
• If the language used for the NDS tree or by the NetWare Bindery server differs from that used
by the machine, file names in the NDS tree or on the NetWare Bindery server might appear
garbled.
• Up to 100 items can be displayed.
• If the selected NDS tree or NetWare Bindery server requires authentication, a login screen
appears. Enter a user name and password for logging on to the NDS tree or NetWare Bindery
server. If you log on to the NDS tree, enter a user name, and then enter the name of the context
containing the user object. If the user name is "user" and the name of the Context is "context",
the user name will be "user.context".
• The machine may fail to transfer the file if you do not have write privileges for the folder or there
is not enough free hard disk space.
• You can register the path to the destination in the machine's address book. For details, see
"Registering the Path to the Selected Destination in the Address Book".
2. Sending Scan Files to Folders
74
To Next Page
Loading...
Need help?
General
