Error Code Cause Solution
If the account name was
entered incorrectly, enter it
correctly and log in again.
B0207-001
An authentication error
occurred because the Address
Book is being used at another
location.
Wait a few minutes and then try
again.
B0208-000
The account is locked because
you have reached the
maximum number of failed
authentication attempts
allowed.
Ask the user administrator to
unlock the account.
Windows Authentication
Error Code Cause Solution
W0103-000
A TWAIN operation occurred
during authentication.
Make sure no other user is
logged on to the machine, and
then try again.
W0104-000 Failed to encrypt password.
1. A password error occurred.
Make sure the password is
entered correctly.
2. "Restrict Use of Simple
Encryption" is enabled.
The administrator has restricted
use of simple encryption. You
can use the encryption key if it
has been specified in the driver.
3. A driver encryption key error
occurred.
Make sure that the encryption
key is correctly specified on the
driver.
W0105-000
A login user name was not
specified but a DeskTopBinder
operation was performed.
Set the DeskTopBinder login
user name correctly.
Authentication Does Not Work Properly
231
To Next Page
Loading...
Need help?
General
