Ricoh D065 - Page 1304

Skew Adjustment
SM 85 D454
Multi-Folding
Unit FD5000
D454
5. Turn the Adjustment screw to do the adjustment for the stopper.
1st, 3rd Stopper
 Turn the Adjustment screw clockwise to lower the front end of the fence.
-or-
 Turn the Adjustment screw counter-clockwise to raise the front of the fence.
2nd Stopper
 Turn the Adjustment screw clockwise to raise the front end of the fence.
-or-
 Turn the Adjustment screw counter-clockwise to lower the front of the fence.
6. Fasten the Set screw in the hole of the diagonal cutout near the hole where you
removed it.
 The diagonal cut may be above or below the original hole, depending on which