Ricoh D065 - Page 558

Service Program Mode Tables
SM Appendix 4-25 D062/D063/D065/D066
Appendix:
Service
Program
Mode Tables
2931* Transfer Current On/Off Timing: LCT
001 La1 (Front)
Adjusts on transfer current ON timing for front side copying.
[–30 to +30/20/1 mm]
002 La1f (Front)
Adjusts the area where the transfer is applied for the leading
edge during front side copying.
[0 to +20/0/1 mm]
003 Lc1r (Front)
Adjusts the area where the transfer current is applied for the
trailing edge during front side copying.
[0 to +20/0/1 mm]
004
Off Timing: Lc1
(Front)
Adjusts the transfer current OFF timing for front side
copying.
[–30 to +30/20/1 mm]
005
On Timing: La2
(Back)
Adjusts on transfer current ON timing for back side copying.
[–30 to +30/0/1 mm]
006
Leading Edge:
La2f (Back)
Adjusts the area where the transfer current is applied for the
leading edge during back side copying.
[0 to +20/0/1 mm]
007
Trailing Edge:
Lc2r (Back)
Adjusts the area where the transfer current is applied for the
trailing edge during back side copying.
[0 to +20/0/1 mm]
008
On Timing: Lc2
(Back)
Adjusts the transfer current ON timing for back side copying.
[–30 to +30/20/1 mm]
009
On Timing: Thick
Paper
Adjusts on transfer current ON timing for copying thick
paper from the LCT.
[–30 to +30/0/1 mm]
010
Leading Edge:
Thick Paper
Adjusts the area where the transfer current is applied for the
leading edge during copying with thick paper from the LCT.
[0 to +20/0/1 mm]
011
Trailing Edge:
Thick Paper
Adjusts the area where the transfer current is applied for the
trailing edge during copying with thick paper from the LCT.