Ricoh D065 - Page 559

Service Program Mode Tables
D062/D063/D065/D066 4-26 SM Appendix
[0 to +20/0/1 mm]
012
Timing: Thick
Paper Lc
Adjusts the transfer current OFF timing for copying thick
paper from the LCT.
[–30 to +30/15/1 mm]
013
On Timing:
M-Thick
Adjusts the transfer current ON timing for copying with
M-thick paper from the LCT.
[–30 to +30/0/1 mm]
014
Leading Edge:
M-Thick
Adjusts the area where the transfer current is applied for the
leading edge during copying with M-thick paper from the
LCT.
[0 to +20/0/1 mm]
015
Trailing
Edge:M-Thick
Adjusts the area where the transfer current is applied for the
trailing edge during copying with M-thick paper from the
LCT.
[0 to +20/0/1 mm]
016
Off Timing:
M-Thick
Adjusts the transfer current OFF timing for copying with
M-thick paper from the LCT.
[–30 to +30/15/1 mm]
017
On Timing: After
Punch
Adjusts the transfer current ON timing for copying with
punch from the LCT.
[–30 to +30/20/1 mm]
018
Leading Edge:
After Punch
Adjusts the area where transfer current is applied for the
leading edge during copying with punch.
[0 to +20/0/1 mm]
019
Trailing Edge:
After Punch
Adjusts the area where transfer current is applied for the
trailing edge during copying with punch.
[0 to +20/0/1 mm]
020
Off Timing: After
Punch
Adjusts the transfer current OFF timing for copying with
punch from the LCT.
[–30 to +30/-16/1 mm]