Ricoh D131 - Page 517

SC700: Peripherals
D131/D132/D133 2-50 SM Appendix
SC720-44 B
Finisher corner stapler motor error (D611/D612)
The stapler motor does not switch off within the prescribed time
after operating. The 1st detection failure issues a jam error, and the
2nd failure issues this SC code.
 Staple jam
 Number of sheets in the stack exceeds the limit for stapling
 Stapler motor disconnected, defective
SC720-52 B
Finisher folder plate motor error (D612)
The folder plate moves but is not detected at the home position
within the specified time. The 1st detection failure issues a jam
error, and the 2nd failure issues this SC code.
 Folder plate HP sensor disconnected, defective
 Folder plate motor disconnected, defective
 Folder plate motor overloaded due to obstruction.
SC720-53 B
Folding unit bottom fence lift motor (D612)
The 1st detection failure issues a jam error, and the 2nd failure
issues this SC code.
 Motor harness disconnected, loose, defective
 Motor defective
SC720-55 B
Clamp roller retraction motor error (D612)
The 1st detection failure issues a jam error, and the 2nd failure
issues this SC code.
 Motor harness disconnected, loose, defective
 Motor defective