Ricoh K-C3 - SP7-XXX (Data Log) Modes

B245/B276/B277/B268/B269 Service Manual 18-Jan-06
152
 Other models: When the ASP detects the A4 size, the controller interprets
it as the LT size. 2. 8K/16K (for the China model only)
 When the ASP detects the A3/B4 SEF, the controller interprets it as the 8K
SEF.
 When the ASP detects the B5/A4 SEF, the controller interprets it as the 16K
SEF.
 When the ASP detects the B5/A4 LEF, the controller interprets it as the 16K
LEF.
The Europe model interprets undetected original sizes as A5 LEF under the
following conditions:
1. SP 4303 1 is "Yes," and
2. SP 4305 1 is "Normal"
The Europe model interprets undetected original sizes as LT SEF under the
following conditions:
1. SP 4303 1 is "Yes," and
2. SP 4305 1 is "A4/LT"
4428
Scan Auto-Adjustment
4428 1
Performs the automatic scanner adjustment. Use this SP mode after replacing
the white plate.
4901
SBU White Level Adjustment
Black Display-Error
[0 = Normal / 1 = Error]
4901 1
Displays the return code of the black-level adjustment. When an error is
detected, SC143 or SC145 is generated.
Black Feedback-EVEN [0 8191]
4901 2
Displays the feedback value of the even channels given by the SBU. Normally,
the value is 1, 2, 3, ..., 8188, 8189, or 8190. However, machine may operate
normally even when the value is 0 or 8191.
Black Feedback-ODD [0 8191]
4901 3
Displays the feedback value of the odd channels given by the SBU. Normally,
the value is 1, 2, 3, ..., 8188, 8189, or 8190. However, machine may operate
normally even when the value is 0 or 8191.
Black Display-Target
[0 63 / 10 /step]
4901 4
Displays the target value for the black-level adjustment executed during