11
2017 Page 101 5IN2413 B
Quick keys Parameter Default Range
CP01
For CP01, see page 95
EN 50131 (G3)
For EN 50131 (G3), see page 92
Customer
Sets the panel programming options in compliance with the selected
customer code. Each customer has its predefined parameters.
Note
Selecting a customer that is different than the one in use will automatically
default the panel
Language
Sets the system language (e-mail, SMS and keypad interface language)
Text - Change the interface keypad language
Voice - Change the voice language (this option is only available if a voice
module is assigned to the system)
Licenses
View Licenses: To view the total number of enabled zone licenses. By
default, 64 zones are enabled in the system.
D/L Licenses: To update the system with any additional zone licenses
that were purchased (the panel must be connected to the Cloud to view).
Partition Qty
8 08—32
Set the Partition Quantity parameter to define the number of partitions
allocated to the system (up to 32).
Press OK to view the number of partitions. Default is 08 (meaning up to 8).
To change number of partitions, enter the number of partitions
over the number that currently displays.
To Next Page
Loading...
