Risco ProSYS Plus - Page 140

11
/
2017 Page 140 5IN2413 B
 xx  
Panic Follow
Activates the utility output when a panic alarm is triggered in the
selected partition(s) from the keypads, remote controls or a zone
defined as Panic.
 xx  
Special Follow (Emergency)
Activates the utility output when a special alarm is triggered in the
selected partition(s) from the keypads or a zone defined as Special
.
 xx  
Buzzer Follow
Activates the output when a keypad in the selected partition(s) sounds its
buzzer during auto setting, Exit/Entry delays, and alarm conditions.
 xx  
Chime Follow
Activates the output when a keypad in the selected partition(s) sounds its
chime.
 xx  
Exit/Entry Follow
Activates the output when the selected partition(s) initiates an Exit/Entry
delay period.
 xx  
Fire Trouble Follow
Activates the output when a Fire Trouble is detected in the selected
partition(s).
 xx  
Day Trouble (Zone)
Activates when a day zone trouble is detected in the selected partition(s).
 xx  
Trouble Follow (General)
Activates the output when a fault condition is detected in the selected
partition.
 xx  
Stay Follow
Activates the utility output when the selected partition(s) is armed in the
partial (Stay) arming mode.
 xx  
Tamper Follow
A latched output activated when a tamper occurs in the selected
partition(s) and follows any type of tamper. The output deactivates at
tamper reset.
 xx  
Disarm Follow
Activates the utility output when the selected partition(s) is disarmed.