Risco ProSYS Plus - Page 158

11
/
2017 Page 158 5IN2413 B
Communication  Method  IP
Quick Keys Parameter Default Range

IP
The IP menu contains parameters for the communication of the system over
the IP network.

IP Config
The IP menu contains parameters for the communication of the system
over the IP network
.

Obtain IP
Defines automatically whether the IP address, which the ProSYS Plus refers
to, is dynamic or static.

Dynamic IP
The system refers to an IP address provided by the DHCP.

Static IP
The system refers to a static IP Address.

Panel Port
The ProSYS Plus Port address.

Panel IP (Only for
Static IP)
The ProSYS Plus static IP address

Subnet Mask (Only
for Static IP)
The subnet mask is used to determine where the network number in an IP
address ends.

Gateway (Only for
Static IP)
The IP address of the local Gateway, which enables communication settings
to other LAN segments. This address is the IP address of the router
connected to the same LAN segment as the ProSYS Plus.

DNS Primary (Only
for Static IP)
The IP address of the primary DNS server on the network.

DNS Secondary (Only
for Static IP)
The IP address of the secondary DNS server on the network.