11
2017 Page 224 5IN2413 B
Event Message Description
GSM:IP Trouble IP address is incorrect
GSM:Mdl comm.OK Communication between the GSM/GPRS Module and the ProSYS
Plus is OK
GSM: Module comm. Internal GSM/GPRS bus module trouble
GSM:MS OK GPRS communication to the MS is OK
GSM:MS trouble GPRS communication failure to the MS
GSM:NET avail. GSM network is not available
GSM:NET avai.OK GSM Network is available
GSM:NET qual.OK GSM Network quality is acceptable
GSM:NET quality The GSM RSSI level is low
GSM:PIN cod.err PIN code entered is incorrect
GSM:PIN code OK PIN code is correct
GSM:PUK Cod err PUK code required
GSM:PUK Code OK PUK Code entered is correct
GSM:SIM OK SIM Card in place
GSM:SIM trouble SIM card missing or not properly sited
H.Temp rst Z=xx High temperature alert restored from zone XX defined as a
temperature detector
High Temp. Z=xx High temperature alert from zone XX defined as a temperature
detector
HOM:P=y C=zz Partition Y is armed in Stay mode by user ZZ
HOME:P=y KF=zz Partition Y is home armed using keyfob ZZ
HU.ReinstateP=y Hold-Up Reinstatement in partition y
IPC:DHCP error Failed to acquire an IP address from the DHCP server
IPC:DHCP OK Succeeded to acquire an IP address from the DHCP server
IPC: downld err IP Card generated a download error
IPC: download OK IP Card download was OK
IPC: evnt log ER IP Card generated an event log error
IPC: evnt log OK IP Card event log generated no error
IPC: hardware OK IP Card hardware is OK
IPC: hardware error IP Card generated a hardware error
IPC: mail error IP Card generated a mail error
IPC: mail OK IP Card mail is OK
IPC:MS=y error IP Card Monitoring station ID=Y generated an error
IPC:MS=y OK IP Card Monitoring station ID=Y was OK
IPC: Network err Failed to connect to IP network
IPC: Network OK Successful connection to IP network
To Next Page
Loading...
