EasyManua.ls Logo

Risco ProSYS Plus - Page 227

Risco ProSYS Plus
280 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
/
2017 Page 227 5IN2413 B
Event Message Description
No comm ze=y Bus communication failure with zone expander ID=Y
No comm. GSM No communication between the GSM/GPRS Module and the
ProSYS Plus
No comm. LRT No communication between long range transmitter and system
No fault z=xx Trouble restore in zone XX (TEOL zone or Bus zone input TEOL)
No jam wme=y Jamming restore on wireless module expander ID=Y
No mask z=xx Anti mask trouble restore from zone XX
Nxt hom:p=y Partition Y is armed in Next Stay mode
Overld rs ps=y Overload restore from 3A SMPS Y
Overload ps=y Overload from 3A SMPS Y
Phone fail If the phone line is cut or the DC level is under 1V
Phone restore Phone line trouble restore
PIR rstr Z=xx PIR trouble restore from Bus zone XX
PIR trbl Z=xx PIR trouble from Bus zone XX
Police KF=yy Police (panic) alarm from remote control YY
Police KP=y Police (panic) alarm from keypad Y
POT.LD RS PS=y Potential overload restore of 3A SMPS joined by 3A SMPS Y
POT.OVRLD PS=y Potential overload of SMPS joined by 3A SMPS Y
PROX FAIL S=y Fail in the proximity anti approach protection in siren Y
PROX OK SIREN=y Proximity anti approach protection is restored in siren Y
PROX TMP RS S=y Proximity tamper restore from siren ID =Y
PRX TMP SIREN=y Proximity tamper from approaching siren ID=Y
PS=yOVER.R C=zz Overload in 3A SMPS Y. Reset by user ZZ
Radio l.bat S=y Radio low battery trouble from siren Y
Radiol.bat rS=y Radio low battery restore from siren Y
Remote Prog The system has been programmed from the configuration
software
Reset: P=y C=zz Reset of partition ID=Y and user ID=ZZ
Restore Z=xx Alarm restore in zone no. XX
Rmt Arm:P=y Partition Y armed from the configuration software
Rmt Dis:P=y Partition Y disarmed from the configuration software
RMT Hom:P=y Partition Y armed in Stay mode from the CS software
SEISMIC OK Z=xx Seismic Test in bus zone XX has been restored
SEISMIC TR Z=xx Seismic Test rouble in bus zone XX
Self Fail Z=xx Bus zone XX has failed the Self Test
Self OK Z=xx Self Test in bus zone XX has been restored
Siren=$ Lost Siren is regarded as lost following supervision test

Table of Contents

Other manuals for Risco ProSYS Plus

Related product manuals