11
2017 Page 226 5IN2413 B
Event Message Description
LRT:NO BAT OK The long range transmitter no battery is not troubling.
LRT:SYSTEM ERR The long range transmitter is generating a system error.
LRT:SYSTEM OK The long range transmitter system status is OK
Main Bell RS Bell trouble restore in Main Panel
Main:AC Rstr AC power restore on main panel
Main Aux Rst Restore of Aux power on Main Panel
Main: Bat Rst Low battery trouble restore from the main panel
Main: Low AC Loss of AC power from the main panel
Main: Low Bat Low battery trouble from the main panel
Main:No aux Failure in the Aux power on Main Panel
Main:No bell Bell trouble in Main Panel
Masked Z=XX Anti mask trouble from zone XX
MS=y call error Communication fail trouble to MS phone no. Y
MS=y restore Communication fail trouble restore to MS phone no. Y
MW restore z=xx Trouble restore in the MW channel of BUZ zone XX
MW trouble z=xx Trouble in the MW channel of BUZ zone XX
Next arm:p=y Partition Y armed in Next Arm mode
Next dis:p=y Partition Y disarmed in Next Disarm mode
No aux ps=y Failure in the Aux power on power supply ID=X
No aux ze=y Failure in the S. Aux power on zone expander Y
No bell ps=y Bell trouble in power supply ID=Y
No Com IPC Communication failure between the ProSYS Plus and IP card
No com kp=y Communication failure between the ProSYS Plus and keypad
ID=Y
No com kr=y Communication failure between the ProSYS Plus and Key Reader
ID=Y
No com voice Communication failure between the ProSYS Plus and the
Advanced Voice module
No com WME=y Communication failure between the ProSYS Plus and wireless
module expander ID=Y
No comm BZE=y Communication failure between the ProSYS Plus and bus zone
expander ID=Y
No comm PS=y Communication failure between the ProSYS Plus and power
supply Y
No comm Siren=y Communication failure between the ProSYS Plus and siren Y
No comm uo=y Bus communication failure with UO expander ID=Y
No comm z=xx Bus communication failure with Bus zone XX
To Next Page
Loading...
