11
2017 Page 81 5IN2413 B
Quick keys Parameter Default Range
Buzzer at Stay
15 01—99 seconds
Defines how much time the keypad’s buzzer will sound before the external
sounders start to operate while an alarm occurs in Stay (partial arming)
mode. The timer is relevant only if the system control BellBuzzer is
defined as Yes.
Status Timer
000 0—255 seconds
Defines if the system status will be displayed while the system is armed.
When the time is defined as 0, the system status will be displayed during the
arming period. When the time is not 0, the system status will be displayed
only during this interval after the arming period starts.
Service Timer
000 0—255 weeks
Use this timer to periodically generate a “service required” message so that
the user is reminded that a service call is required. The user may continue to
arm and disarm the system. When this time is other than 0, the panel will
count down the time. When the time expires, a service message will be
displayed on all LCD keypads whenever the keypad is on Disarm display.
To clear the message, the installer needs to reset the time, enter a code from
the Anti Code menu or perform a “remote reset” to the panel.
Pulse Open
00 sec
0—255 seconds
This timer is relevant only for zones defined with a pulse counter greater
than one. See Pulse Counter, page 116 ().
If such a zone is regarded as not ready for the time defined under this timer,
then the zone will be tripped and act according to its type definition.
Inactivity Timer
0
0—255 minutes
This timer relates to the Automatic Arm/Disarm scheduler. If there is no
signal from any of the zones located in a partition that is defined under an
Arm/Disarm scheduler for the time defined as Inactive Timer, then the
automatic schedule will be activated and the relevant partitions will be auto-
armed (according to the schedule definition).
Note
Inactive Timer of scheduling program should be defined as ON under:
User Menu Clock Scheduler Weekly Schedule# Arm/Disarm
6)Inactive
Timeout Beeps
15 0-60 minutes
Beeping sound indication for timeout
To Next Page
Loading...
