Riso MZ970 - Thermal Print Head; Platen Glass and Platen Cover Pad

Maintenance
Cleaning
257
Thermal Print Head
Clean the Thermal Print Head each time you replace the Master Roll.
Open the Master Making Unit Cover, and gently wipe the Thermal Print Head in the back of the unit several times with
a soft cloth or tissue.
BCaution:
• Since the Thermal Print Head is very delicate, avoid shocks or scratches with a hard object.
• Since Thermal Print Head is susceptible to (damage by) static electricity, please be sure to remove the static elec-
tricity charged in the body before cleaning.
Platen Glass and Platen Cover Pad
If the Platen Glass and/or Platen Cover Pad is stained, gently wipe them with a soft cloth or tissue.
BCaution:
• Since the Platen Glass is very delicate, avoid shocks or scratches with a hard object.