Functions for Master-Making
Printing Side-by-Side on One Sheet [2 Up] [Multi-Up Print]
95
Operation for Multi-Up Tickets
For “Multi-Up Tickets”, the specification of the short edge size of the original (the width) is used to calculate the
number of images that can be printed on one sheet of paper (print paper size divided by short edge size of the orig-
inal). A ticket width of between 50 mm and 210 mm can be specified.
Ex.)
Short edge of the original 50 mm
Long edge of the print paper 297 mm (A4 size)
297÷50=5 with a remainder of 47
In this example, 5 images print on one sheet of paper.
1
Select a colour mode.
Select 1-Colour or 2-Colour print.
Note:
•See -)p.25 for how to select a colour mode.
2
Place an original and load paper.
Place the original on the Platen Glass.
For 2-Colour printing, place the original for
Drum 1.
Important!:
• Pay attention to the orientation of the original.
3
Touch [Functions] on the Master
Making Basic Screen.
4
Touch [Multi-Up Print].
5
Select the Page Size to use.
Touch the Page Size same as the original and
touch [Next].
Reproduction Size is set automatically and Multi-
Up Print screen is displayed.
Paper output
direction
Original Printed paper
Blank
More than
5 mm
To Next Page
Loading...
