Riso MZ970 - Registering a Custom Paper Size [Custom Paper Entry]; Entering Sizes and Changing Names

Advanced Features
Registering a Custom Paper Size [Custom Paper Entry]
186
Registering a Custom Paper Size
[Custom Paper Entry]
Non-standard paper sizes must be pre-entered into memory. Once a paper size is stored into memory, it can be
retrieved with the [Paper] button from the Master Making Basic Screen.
Up to 30 different sizes may be entered. Previously stored sizes can be modified or deleted.
You can register paper sizes between 100 mm × 148 mm to 340 mm × 555 mm. However, any paper longer than
436 mm prints in extended paper mode.
)p.188
Important!:
• Custom paper sizes must be entered. Failure to do so may result in incorrect scanning.
• 2-Colour printing is not possible for paper lengths of 246 mm or less.
Entering sizes and changing names
1
Touch [Admin.] on the Basic Screen
for each mode.
2
Touch [OK].
3
Touch [System] or to display
[Custom Paper Entry] on the screen.
4
Touch [Custom Paper Entry].