Riso MZ970 - Advanced Features

Functions for Printing
Paper Feed/Output Settings for Special Paper and Printing Types [Eject Wing Control] [Special Paper Ctrl]
129
Making changes to Special Paper Ctrl Setting
1
Display the Parameter List screen.
Follow steps 1 to 3 ()p.124).
2
Touch [Retrieve].
3
Touch the button to change.
4
Change the setting parameters.
Parameters for the following can be changed:
“Paper Feed Adj.” and “Paper Eject Adj”.
Note:
• For details of changes, see )p.122.
5
Touch [Revise] on the Special Paper
Ctrl screen.
6
Touch [OK].
Returns to the Special Paper Ctrl screen after
parameters have been revised.
OFF
4
OFF
4
Close
Special Paper Ctrl
S-Tray Upper Limit
Paper Feed Amount
Auto
Auto
ReviseEntry/Call
Paper Feed Adj.
Air Blow
Separation Fan
Paper Eject Adj.
Side
Pre-suction Fan
Suction Fan
Reseive Tray
Close
Parameter List
A-1 A-4
Poster A-5
A-3 A-6
Register
Retrieve
Rename
Clear
Select a Button to be Retrieved
OFF
4
OFF
4
Close
Special Paper Ctrl
S-Tray Upper Limit
Paper Feed Amount
Auto
Auto
ReviseEntry/Call
Paper Feed Adj.
Air Blow
Separation Fan
Paper Eject Adj.
Pre-suction Fan
Suction Fan
Close
Parameter List
A-1 A-4
Poster A-5
A-3 A-6
Register
Retrieve
Rename
Clear
Select a Button to be Retrieved
Close
Special Paper Ctrl
S-Tray Upper Limit
Paper-Feed Amount
+1
+2
Revise Poster
Paper Feed Adj.
Air Blow
Separation F
Paper Eject Adj
Entry/Call
OFF
4
OFF
4
Cancel OK
This Setting will be
Revised
OK?
Poster
Close
Special Paper Ctrl
S-Tray Upper Limit
Paper-Feed Amount
+1
+2
ReviseEntry/Call Poster
Paper Feed Adj.
Air Blow
Separation F
Paper Eject Adj
OFF
4
OFF
4