Functions for Master-Making
Using Custom-Sized Paper [Paper]
82
Using Custom-Sized Paper [Paper]
The machine automatically detects standard-sized paper in the Paper Feed Tray to create a correct size master for
printing. However, because non-standard paper sizes cannot be detected, they must be manually specified before a
master can be made.
Important!:
• Custom paper size must be registered on the Admin. screen. Failure to do so may make an incomplete master.
)p.186
1
Touch [Paper] on the Master Making
Basic Screen.
2
Touch the desired paper size.
Note:
• Touch [Auto] to use standard-size paper.
Important!:
• Previously recorded custom paper sizes is dis-
played on this screen. Make sure to register any
custom sizes not displayed here prior to use.
)p.186
3
Touch [OK].
The following screen appears.
Returns to the Master Making Basic Screen.
Paper size is updated.
To Next Page
Loading...
