Riso MZ970 - 2-Colour Printing with 2 Originals

Basic Operations
Basic Process
37
Basic Process
The general print job flow for 2-Colour printing is explained here.
There are two methods for 2-Colour printing: Preparing two originals separated by colour (For Drum 1 and For Drum
2), or separating the colours of one original into two.
Process Operation Flow
For 2-Colour printing with 2 originals
separated by colour:
For 2-Colour printing by separating the
colours of a single original
(when using Easy 2Colour)
Master-Making Place the original for Drum 1.
Place the original on Platen Glass or in ADF unit (option).
Place the original.
Place the original on Platen Glass or in ADF unit (option).
Scanning the Original
The scanner scans the original.
Master Making on Drum 1
A master for Drum 1 is made and wrapped around Drum 1.
Original for
Drum 1
Original for
Drum 2
Print Result
Print ResultOriginal