Telephone Interface Functions
7-9
Select (Review) Autopatch Dump Message
This message is sent over the repeater transmitter when an
autopatch or reverse patch is terminated.
• Lets the user know that an autopatch or reverse patch was successfully
terminated.
• This message is not sent when Phone Line Control Mode call is terminated.
Command Form:
Command Form Default
Select Autopatch Dump Message (PW) 31 43 (message) * none
Review Autopatch Dump Message (PW) 34 43 * none
Acknowledgment: Sends OK
Errors:
Error Meaning
? err 1 wrong number of digits entered
? err 2 illegal digit entered
Default Condition: No message.
Example:
To program the dump message to say “Call complete at (time) on (day) (date)”,
e.g. “Call complete at 12:23 PM on Monday July 21st”, enter the following:
(PW) 31 43 9960 0067 0088 0039 9820
9821 0358 9826 9829 9828 *
To Next Page
Loading...