S-COM 7K - Page 352

7K • Appendix A
A-52
Command Quick Reference
Page Command Name Form and Data Digit Default User
21-19 Select Transmitter Offset (RBPW) 42 (offset) *
offset:
1 = Minus
2 = Simplex
3 = Plus
0 = On 1200, Minus 20. On 420-
440, special offset depending
on radio.
none
21-19 Macro: Select Transmitter Offset (RBPW) 22 (offset) *
offset =
1 = Minus
2 = Simplex
3 = Plus
0 = On 1200, Minus 20. On 420-
440, special offset depending
on radio.
none
21-20 Enable/Disable Transmitter (RBPW) 45 x *
1 = Enable
0 = Disable
disabled
21-20 Macro: Enable/Disable Transmitter (RBPW) 25 x *
1 = Enable
0 = Disable
disabled
21-21 Enable/Disable Receiver (RBPW) 44 x *
1 = Enable
0 = Disable
enabled
21-21 Macro: Enable/Disable Receiver (RBPW) 24 x *
1 = Enable
0 = Disable
enabled
21-22 Enable/Disable Radio Power (RBPW) 46 x *
1 = Enable
0 = Disable
enabled
21-22 Macro: Enable/Disable Radio Power (RBPW) 26 x *
1 = Enable
0 = Disable
enabled
21-23 Select Transmitter Power Output (RBPW) 43 x *
1 = Low
2 = Medium
3 = High
none
21-23 Macro: Select Transmitter Power Output (RBPW) 23 x *
1 = Low
2 = Medium
3 = High
none
21-24 Select Frequency of CTCSS (RBPW) 47 (tone code) *
See Page 10-5 for frequencies of 67.0
through 203.5. Above 203.5, use:
33 = 210.7
24 = 218.1
35 = 225.7
36 = 233.6
37 = 241.8
38 = 250.3
none