Siemens SIMATIC ET 200S - Parameter Length in Bytes

Configuration Options
3-46
ET 200S Distributed I/O System
EWA-4NEB 780602402-12
Table 3-15 Parameter length in bytes
Module
Parameter
length
IM151-1 BASIC 19 byte
IM151-1 STANDARD
IM151-1 FO STANDARD
27 bytes
IM151-1 HIGH FEATURE 27 bytes
56 bytes*
IM151-3 PN --
PM-E 24 VDC
PM-E 24-48 VDC
PM-E 24-48 VDC/
24-230 VAC
3bytes
2DI 24 VDC High Feature
4DI 24 VDC High Feature
3bytes
3bytes
2DI 24 VDC Standard
4DI 24 VDC Standard
4DI 24 VDC/SRC Standard
1bytes
4DI NAMUR 12 bytes
2DI 120 VAC Standard 3bytes
2DI 230 VAC Standard 3bytes
2DO 24 VDC/0.5 A High Feature 3bytes
2DO 24 VDC/0.5 A Standard
4DO 24 VDC/0.5 A Standard
1bytes
2DO 24 VDC/2 A High Feature 3bytes
2DO 24 VDC/2 A Standard
4DO 24 VDC/2 A Standard
1bytes
2DO 24-230 VAC/1 A 3bytes
2RO NO 24-120 VDC/5 A 24-230
VAC/5 A
3bytes
2RO NO/NC 24-48 VDC/5 A
24-230 VAC/5 A
3bytes
2AI U Standard
2AI U High Feature
4bytes
2AI U High Speed 12 bytes
(4 bytes*****)
RESERVE -- -- --
2AI I 2WIRE Standard
4AII2WIREST
4bytes
7bytes
Module Parameter
length
2AI I 2WIRE High Speed 12 bytes
(4 bytes***)
2AI I 4WIRE Standard
2AI I 2/4WIRE High Feature
4bytes
2AI I 4WIRE High Speed 12 bytes
(4 bytes****)
2AI RTD Standard 4bytes
2AI RTD High Feature 7bytes
(4 bytes**)
2AI TC Standard
2AI TC High Feature
4bytes
2AO U Standard
2AO U High Feature
7bytes
2AO I Standard
2AO I High Feature
7bytes
1Count 24V/100kHz 16 bytes
1Count 5V/500kHz 16 bytes
1SSI 8byte
EM 1STEP 5V/204kHz 7bytes
2PULSE 16 bytes
1POS INC/Digital
1POS INC/Digital
1POS INC/Analog
1POS INC/Analog
16 bytes
1SI 3964/ASCII
1SI Modbus/USS
4/8 bytes
4 IQ-SENSE 16 bytes
Motor starter STANDARD 3bytes
Motor starter
HIGH FEATURE
12 bytes
* Clocking is activated.
** When used as 2AI RTD Standard
*** When used as 6ES7 134 4GB50-0AB0
**** When used as 6ES7 134 4GB50-0AB0
***** When used as 6ES7 134 4GB50-0AB0