Siemens SIMATIC ET 200S - 2 DO 24 VDC;2 A High Feature digital electronic module (6 ES7 132-4 BB30-0 AB0)

Digital Electronic Modules
11-68
ET 200S Distributed I/O System
EWA-4NEB 780602402-12
11.16 2DO 24 VDC/2 A High Feature digital electronic module
(6ES7 132-4BB30 -0AB0)
Order number
6ES7 132-4BB30-0AB0
Properties
• Digital electronic module with two outputs
• Output current 2 A per output
• 24 VDC rated load voltage
• Suitable for solenoids, DC current protection and warning lights
• Supports clock synchronized mode
Special feature
When the rated load voltage of 24 VDC is connected at the power module via a
mechanical contact, the digital outputs carry a ”1” signal for approx. 50 µs because
of the circuit type. This must be considered when the module is connected to fast
counters.
Connection assignment
The following table shows the terminal assignment of the 2DO 24 VDC/2 A High
Feature for the various terminal modules:
Table 11-24 Terminal assignment of the 2DO 24 VDC/2 A High Feature
View
Terminal assignment Remarks
MM
VDCVDC
AUX1 (e.g. PE)
DO
1
DO
0
AUX1 (e.g. PE)
2-wire 3-wire 4-wire
TM-E15S24-
A
1 and 2DO 24
V
DC/2
A
High Feature
CH1CH0
2
3
4
6
7
8
1
5
AUX1 must be occupied
with 4 wires at PE.
A
A
Channel 0:
Terminals 1 to A4
Channel 1:
Terminals 5 to A8
DO: Output signal
(max. 2 A per channel)
24 VDC: Sensor supply
M : Load power supply
ground