Siemens SIMATIC ET 200S - Mode of Operation: Teach-in

4 IQ-SENSE
13-14
ET 200S Distributed I/O System
EWA-4NEB 780602402-12
Mode of Operation: Teach-in
Teach-in ended
by falling edge at
bit 0 in the PIQ
Normal operation
Setvalue”0”atbit1to7in
PIQ
Start Teach-in by
rising edge at
bit 0 in the PIQ
Teach-in error:
Learned sensitivity/
distance value = 0
(bit1to7inthePII)
Preset of a
sensitivity/distance
value (IntelliTeach)
No valid sensitivity/
distance value detected
Valid sensitivity/
distance value detected
1. Option
2. Option
Teach-in is executed
Figure 13-7 Mode of Operation: Teach-in