Siemens SIMATIC ET 200S - Commissioning on the PROFINET IO

Brief Instructions on Commissioning ET 200S
2-10
ET 200S Distributed I/O System
EWA-4NEB 780602402-12
2.2 Commissioning on the PROFINET IO
Introduction
The following simple example teaches you step by step how to commission the
ET 200S on PROFINET IO:
• Installing and wiring the ET 200S
• Configuration with STEP 7 using the device database file
• Integration in the user program
• Switching the ET 200S on
• Evaluation of interrupts and diagnoses:
-- Removal and insertion of modules
-- Switching off the load voltage on the power module
-- Wire break of the actuator wiring on the digital output module