Siemens SIMATIC ET 200S - TM-PF30 S47-F1 terminal module (for PM-D F DC 24 V); (3 RK1 903-3 AA00)

Terminal Module
9-15
ET 200S Distributed I/O System
EWA-4NEB 780602402-12
9.5 TM-PF30S47-F 1 terminal module (for PM- D F DC 24V);
(3RK1 903-3AA00)
Order number
3RK1 903-3AA00 (screw-type terminal)
Properties
• Terminal module for fail-safe PM-D F 24 VDC PROFIsafe power module
• Power supply for a new potential group to the next TM-P terminal module
• Basic wiring of the terminal module
• Build-as-you-go interference conductor from electronics module to standard
mounting rail over spring contact
• Inserting a shield connection element
• Uninterrupted AUX1 bus without a connection to the terminals
Terminal assignment
See the following table for the terminal assignment of the terminal module:
Table 9-7 Terminal assignment of the TM-PF30S47-F1 terminal module
View
Terminal Name
20 24 VDC 24 VDC rated load voltage: for
inserted power module and SG 1 to
SG 6 and U 1 potential rails
21 M Chassis ground
22
27 24 VDC 24 VDC rated load voltage: for
inserted power module and SG 1 to
SG 6 and U 1 potential rails
2
1
2
8
2
7
2
0
28 M Chassis ground