Siemens SIMATIC ET 200S - Terminal Assignment of the 4 DO 24 VDC;0.5 a Standard

Digital Electronic Modules
11-52
ET 200S Distributed I/O System
EWA-4NEB 780602402-12
11.12 4DO 24 VDC/0.5 A Standard digital electronic module
(6ES7 132-4BD00 -0AA0)
Order number
6ES7 132-4BD00-0AA0
Properties
• Digital electronic module with four outputs
• Output current 0.5 A per output
• 24 VDC rated load voltage
• Suitable for solenoids, DC current protection and warning lights
Special feature
When the rated load voltage of 24 VDC is connected at the power module via a
mechanical contact, the digital outputs carry a ”1” signal for approx. 50 µs because
of the circuit type. This must be considered when the module is connected to fast
counters.
Connection assignment
The following table shows the terminal assignment of the 4DO 24 VDC/0.5 A
Standard for the various terminal modules:
Table 11-20 Terminal assignment of the 4DO 24 VDC/0.5 A Standard
View
Terminal assignment Remarks
MM
AUX1 (e.g. PE)
AUX1 (e.g. PE)
2-wire
TM-E15S24-
A
1 and 4DO 24
V
DC/0.5
A
Standard
2
3
4
6
7
8
1
5
CH1CH0
DO
1
DO
0
DO
2
DO
3
CH2 CH3
AA
Channel 0: Terminals 1
and 3
Channel 1: Terminals 5
and 7
Channel 2: Terminals 2
and 3
Channel 3: Terminals 6
and 7
DO: Output signal (max.
0.5 A per channel)
M : Load power supply
ground