Siemens SIMATIC ET 200S - Wiring terminal modules for digital, analog, and process-related modules

Wiring and Fitting
5-15
ET 200S Distributed I/O System
EWA-4NEB 780602402-12
Wiring terminal modules for digital, analog, and process -related modules
The terminal assignment of the terminal module depends on which electronic
module is inserted. You will find information on this in the following chapters:
• Terminal modules in Chapter 9
• Digital electronic modules in Chapter 11
• Analog electronic modules in Chapter 12
• Process-related modules: See the process-related functions manual
2
3
6
7
15
2
3
4
6
7
8
15
2
3
6
7
15
TM-E15S24-A1 and
electronic module
TM-E15S23-01 and
electronic module/process-related
module
TM-E15S23-01 and
electronic module
Channel 0
Channel 1
AUX1 bus (PE) fed through.
Connection to terminals A4 and A8.
AUX1 bus (PE) fed through. No
connection to terminals 4 and 8.
AUX1 bus fed through.
No connection to the
terminals.
CH0 CH1
Channel 0/2
CH0/2
Channel 1/3
CH1/3
Channel 1
CH0
Channel 0
CH1
Channel 1
CH0
Channel 0
CH1
Channel 1
CH0
Channel 1/3
CH1/3
Channel 0/2
CH0/2
Channel 0/2
CH0/2
Channel 1/3
CH1/3
TM-E15S26-A1 and electronic
module/process-related
module
Channel 0
Channel 1
AUX1 bus (PE) fed through. Connection to
terminals A4, A8 and A3, A7.
CH0 CH1
Channel 0/2
CH0/2
Channel 1/3
CH1/3
2
3
4
6
7
8
1
5
A
4
A
3
A
8
A
7
A
4
A
8
26
15
TM-E15S24-AT and
2AI TC HF
Channel 0 Channel 1
AUX1 bus (PE) fed through. No connection
to the terminals of the terminal module.
CH0 CH1
Figure 5-8 Wiring terminal modules for electronic modules