Siemens SIMATIC ET 200S - Analog value visualization; Electronic modules with analog inputs; Electronic modules with analog outputs

Analog Electronic Modules
12-2
ET 200S Distributed I/O System
EWA-4NEB 780602402-12
Chapter PageTopic
12.15 2AI RTD High Feature analog electronic module
(6ES7 134-4NB50-0AB0)
12-82
12.16 2AI TC Standard analog electronic module
(6ES7 134-4JB00-0AB0)
12-90
12.17 2AI TC High Feature analog electronic module
(6ES7 134-4NB00-0AB0)
12-95
12.18 2AO U Standard analog electronic module
(6ES7 135-4FB00-0AB0)
12-99
12.19 2AO U High Feature analog electronic module
(6ES7 135-4LB01-0AB0)
12-103
12.20 2AO I Standard analog electronic module
(6ES7 135-4GB00-0AB0)
12-107
12.21 2AO I High Feature analog electronic module
(6ES7 135-4MB01-0AB0)
12-111
12.1 Analog value visualization
In chapter Description Page
12.1.1 Analog Value Representation for Measuring Ranges with
SIMATIC S7
12-4
12.1.2 Analog value visualization for measurement ranges of the analog
input in SIMATIC S7 format
12-5
12.1.3 Analog value visualization for measurement ranges of the analog
output in SIMATIC S7 format
12-15
Electronic modules with analog inputs
With the electronics module with analog inputs, continuously variable signals, such
as those occurring in temperature measurement and pressure measurement, can
be acquired, evaluated, and converted to digital values for further processing.
Electronic modules with analog outputs
With the electronics modules with analog outputs, digital values set by a controller
can be converted to a corresponding analog signal (current) in an analog output
module and used to control suitable actuators (setpoint input for speed controllers,
temperature controllers and similar).