Siemens SIMATIC ET 200S - 2 AI I 2 WIRE Standard analog electronic module (6 ES7 134-4 GB00-0 AB0)

Analog Electronic Modules
12-54
ET 200S Distributed I/O System
EWA-4NEB 780602402-12
12.8 2AI I 2WIRE Standard analog electronic module
(6ES7 134-4GB00-0AB0)
Order number
6ES7 134-4GB00-0AB0
Properties
• 2 inputs for current measuring
• Input range:
4to20mA,resolution13bits
Terminal assignment
The following table shows the terminal assignment of the 2AI I 2WIRE Standard for
the various terminal modules:
Table 12-39 Terminal assignment of the 2AI I 2WIRE Standard
View
Terminal assignment Remarks
M
1--
M
0--
AUX1 (e.g. PE)
2
3
4
6
7
8
1
5
M
1+
M
0+
AUX1 (e.g. PE)
M
ana
M
ana
TM-E15S24-A1 and 2AI I Standard
CH1CH0
mA
mA
AUX1 must be
assigned to PE.
AA
Channel 0: Terminals 1 to A4
Channel 1: Terminals 5 to A8
M+: Input signal ”+”
M--: Input signal ” --”
M
ana
: Ground (from power
module)
The 2-wire transducers are
powered over the
measurement leads.
M
1--
M
0--
2
3
4
6
7
8
1
5
M
1+
M
0+
M
ana
M
ana
TM-E15S24-01 and 2AI I 2WIRE Standard
CH1CH0
mA
n. c.n. c.
Channel 0: Terminals 1 to 4
Channel 1: Terminals 5 to 8
M+: Input signal ”+”
M--: Input signal ” --”
M
ana
: Ground (from power
module)
The 2-wire transducers are
powered over the
measurement leads.
Terminals 4 and 8 can be
used for connection of cables
that are not required up to
30 VDC.