Siemens SIMATIC ET 200S - RESERVE modules; Order number; Features; Note

14-1
ET 200S Distributed I/O System
EWA-4NEB 780602402-12
RESERVE modules
Order number
6ES7 138-4AA00-0AA0 (installation width 15 mm)
6ES7 138-4AA10-0AA0 (installation width 30 mm)
Features
The RESERVE module has the following features:
• suitable for all TM-E terminal modules (installation width 15 mm and 30 mm)
• reserved for a slot on any electronic module. Insert the RESERVE module into
the reserved slot of the ET 200S configuration.
Note
• Note the following with the IM 151 (6ES7 151-1AA01-0AB0,
6ES7 151-1AA02-0AB0), IM 151 FO (6ES7 151-1AB00-0AB0,
6ES7 151-1AB01-0AB0) and IM 151/ CPU (6ES7 151-7AA00-0AB0):
If an electronic module is removed and replaced with a RESERVE module
while the ET 200S is operating, the power supply must be cycled at the
POWER ON/POWER OFF interface module.
• Note the following with the IM 151 (6ES7 151-1AA00-0AB0):
The RESERVE module cannot be installed in the ET 200S.
Configuration (without option handling)
• In STEP 7 or COM PROFIBUS configure the desired electronic module in the
RESER VE module slot that you want to use for future applications, e. g.
4DI DC High Feature.
-- Drag the module to the configuration table
-- Set the parameters
14