Siemens SIMATIC ET 200S - Parameters for analog input modules U, I High Feature

Analog Electronic Modules
12-30
ET 200S Distributed I/O System
EWA-4NEB 780602402-12
Parameters for
• 2AI U High Feature analog electronic module
• 2AI I 2/4WIRE High Feature analog electronic module
Table 12-31 Parameters for analog input modules U, I High Feature
2AI U High Feature
2AI I 2/4WIRE High
Feature
Value range Default setting Effective
range
Group diagnostics (configuration error,
internal error)
• disable
• enabled
disable Module
Diagnosis: underflow/overflow • disable
• enabled
disable Module
-- -- -- Diagnosis: wire
break
1)
• disable
• enabled
disable Channel
Smoothing • No
• weak
• medium
• strong
No Channel
Measurement type /
range
-- -- -- • disabled
• 5V
• 1to5V
• 10 V
10 V Channel
-- -- -- Measurement type /
range
• disabled
• 4to20mA
• 20 mA
4to20mA Channel
Interference Frequency Suppression • disable
• enabled
disable Module
Run time calibration • disable
• enabled
disable Module
1)
Only in 4 to 20 mA measurement range