Siemens SIMATIC ET 200S - IM151-3 PN Wiring

Wiring and Fitting
5-20
ET 200S Distributed I/O System
EWA-4NEB 780602402-12
Wiring the IM151-3 PN interface module
To connect the supply voltage:
1. Strip the insulation from the wires for the supply voltage of the interface module.
2. Tighten the individual wires in the screw-type terminal.
Connecting PROFINET:
1. Insert the bus connector in the PROFINET port.
PROFINET
Supply voltage
(1L+, 2L+, 1M, 2M)
Labeling strip
ET 200S
Figure 5-12 IM151-3 PN wiring