Siemens SIMATIC ET 200S - Wiring terminal modules for power modules

Wiring and Fitting
5-14
ET 200S Distributed I/O System
EWA-4NEB 780602402-12
Wiring terminal modules for power modules
The terminal assignment of the terminal module depends on which power module
is inserted. You will find information on this in the following chapters:
• Terminal modules in Chapter 9
• Power modules in Chapter 10
AUX1 (PE)
AUX1 (PE)
P2
P2
P1
P1
P2
P1
AUX1 (PE)
P2
P1
AUX1 (PE)
P2
P1 P1
P2
2
3
6
7
2
3
6
7
2
3
TM-P15S23-A1 and
power module
TM-P15S23-A0 and
power module
TM-P15S22-01 and
power module
AUX1 bus (PE) fed
through. Connection to
terminals A4 and A8.
AUX1 bus fed
through. No
connection to the
terminals of the
terminal module.
AUX1
AUX1
AUX1
6
A
4
A
8
A
4
A
8
2
3
6
7
1
0
1
1
1
2
1
3
1
4
1
5
1
6
9
A
4
A
8
TM-P30S44-A0 and
power module
7
AUX1 bus (PE)
interrupted. Connection
to terminals A4 and A8.
AUX1 bus (PE) interrupted.
Connection to terminals A4 and A8.
AUX1 (PE)
P2
P1
CH0
Channel 0
CH1
Channel 1
4
8
AA
4
8
AA
4
8
AA
2
1
2
8
2
7
2
0
AUX1 bus fed through. No connection to the
terminals of the terminal module.
VDC
M
TM-PF30S47-F0 and
PM-D F DC24V*
* Terminal assignment
see the ET 200S
Fail-Safe Modules manual
Figure 5-7 Wiring terminal modules for power modules