Siemens SIMATIC ET 200S - ET 200 manual in SIMATIC S5; Technical guide to PROFIBUS DP with SIMATIC S7 and STEP 7

Order Numbers
A-12
ET 200S Distributed I/O System
EWA-4NEB 780602402-12
ET 200 manual in SIMATIC S5
To program and commission the ET 200S with STEP 7 and COM PROFIBUS,you
need the following manual.
Table A-15 STEP 7 and SIMATIC S7 manuals
Name
Contents
ET 200 Distributed I/O System For example,
• Description of the IM308-C master interface
for S5-115U/H, S5-135U, and S5-155U/H
• Description of the S5-95U with the
PROFIBUS DP master interface
• Description of the procedure for installing a
DP system and an FMS system with the
CP 5412 (A2) as master
• Handling COM PROFIBUS
• Working with the FB IM308C/FB 230
Technical guide to PROFIBUS DP with SIMATIC S7 and STEP 7
Table A-16 Technical Guide to PROFIBUS DP and SIMATIC S7
Technical guide
Order Numbers Contents
Decentralizing with PROFIBUS DP
-- Aufbau, Projektierung und Einsatz
des PROFIBUS--DP mit SIMATIC S7
(Structure, Configuration, and Use of
thePROFIBUSDPwiththe
SIMATIC S7)
Josef Weigmann, Gerhard Kilian
Publicis MCD Verlag, 1998
In bookshops:
ISBN 3-89578-074-X
At your SIEMENS
branch:
A19100-L531-B714
Instruction manual for a
simple introduction to
thePROFIBUSDPand
implementation of
automation tasks with
thePROFIBUSDPand
SIMATIC S7.
Use of the PROFIBUS
DP is illustrated for the
SIMATICS7withalarge
number of practical
examples.