Siemens SIMATIC ET 200S - Components for the Example on PROFINET IO

Brief Instructions on Commissioning ET 200S
2-11
ET 200S Distributed I/O System
EWA-4NEB 780602402-12
The following figure illustrates the ET 200S components you require for the
example on PROFINET IO:
DI DI
IM151-3
PN
PM
DI DI DO DO
PM
DO DO
Rail
Terminating module
4 x TM-E15N24-A1 terminal module and
2DO 24 VDC/0.5 A High Feature
electronic module
TM-P15N23-A1 terminal module and
PM-E 24 VDC power module
4 x TM-E15N24-A1 terminal module and 2DI 24 VDC
High Feature electronic module
TM-P15N23-A1 terminal module and PM-E 24 VDC power module
IM151-3 PN interface module
Industrial Ethernet FC installation cable with PROFINET connector
123 4 5 6 78 910 Slot
Figure 2-4 Components for the example on PROFINET IO
Order numbers for the example on PROFINET IO
Quantity Order information Order number
1 ¢ Standard rail 35 mm (e. g. 483 mm length) 6ES5 710-8MA11
1 ¢ IM151-3 PN interface module and terminating module, 1 unit 6ES7 151-3AA00-0AB0
1 ¢ MMC (e. g. 6 4 k) 6ES7 953-8LF11-0AA0
2 ¢ TM-P15N23-A1 Fast Connect terminal module, 1 unit 6ES7 193-4CC70-0AA0
2 ¢ TM-E15N24-A1 Fast Connect terminal module, 5 units 6ES7 193-4CA70-0AA0
2 ¢ PM-E 24 VDC, 1 unit 6ES7 138-4CA00-0AA0
1 ¢ 2DI 24 VDC High Feature, 5 units 6ES7 131-4BB00-0AB0
1 ¢ 2DO 24 VDC/0.5 A High Feature, 5 units 6ES7 132-4BB00-0AB0
PROFINET connector (conforming to the specifications in the
PROFINET Installation Guide)
Suitable installation cables:
• FC Standard Cable
• FC Trailing Cable
• FC Marine Cable
6XV1 840-2AH10
6XV1 840-3AH10
6XV1 840-4AH10