Siemens SIMATIC ET 200S - Interface Modules; Chapter overview; Parameters for interface modules

8-1
ET 200S Distributed I/O System
EWA-4NEB 780602402-12
Interface Modules
Chapter overview
Chapter Description Page
8.1 Parameters for interface modules 8-1
8.2 IM151-1 BASIC interface module (6ES7 151-1CA00-0AB0) 8-8
8.3 IM151-1 STANDARD interface module (6ES7 151-1AA04-0AB0) 8-11
8.4 IM151-1 FO STANDARD interface module
(6ES7 151-1AB03-0AB0)
8-15
8.5 IM151-1 HIGH FEATURE interface module
(6ES7 151-1BA00-0AB0)
8-19
8.6 IM151-3 PN interface module (6ES7 151-3AA00-0AB0) 8-23
8.1 Parameters for interface modules
Parameters for the IM151-1 BASIC interface module
Table 8-1 Parameters for the IM151-1 BASIC interface module
IM151- 1 BASIC
Value range Default Applicability
Operation at Preset -- <>
Actual configuration
Disable/enable Disable ET 200S
Module diagnosis Disable/enable Enable ET 200S
Module status Disable/enable Enable ET 200S
Channel-specific diagnosis Disable/enable Enable ET 200S
Analog - value format SIMATIC S7
SIMATIC S5
S7 ET 200S
Interference frequency
suppression
50 Hz/60 Hz 50Hz ET 200S
Reference junction slot None/2 to 12 None ET 200S
Reference junction input RTD on channel 0/
RTD on channel 1
0 ET 200S
8