Siemens SIMATIC ET 200S - Send Device Name Online to the IM151-3 PN; Assign Device Name Window before Name Assignment

Wiring and Fitting
5-31
ET 200S Distributed I/O System
EWA-4NEB 780602402-12
4. To assign a name to the IM151 PN an online PROFINET connection from the
programming device to the IO device via a switch is required.
Use Target system > Ethernet > Assign device name to send the device
name to the IM151-3 PN.
Figure 5-18 Send device name online to the IM151-3 PN
Click the Assign name buttonintheAssign device name dialog box. The
device name is saved to the MMC in the IM151-3 PN interface module.
Figure 5-19 ”Assign device name” window before name assignment