Siemens SIMATIC ET 200S - Applying slot number labels and color identification labels

Installation
4-13
ET 200S Distributed I/O System
EWA-4NEB 780602402-12
4.7 Applying slot number labels and color identification
labels
Features
• The slot number labels identify the individual I/O modules with a slot (1 to 63).
• The color identification labels permit individual color coding of the terminals in
accordance with company or national conventions. The color identification
labels are available in white, red, blue, brown, yellow , yellow-green, and
turquoise. Each terminal on the terminal module can have a color identification
label.
Prerequisites
• The terminal modules must be installed.
• There must be no electronic modules connected when you apply the slot
number labels.
• The terminal modules should not be wired when you apply the color
identification labels.
• The slot number labels and color identification labels are applied onto the
terminal modules.
-- Position of slot number label: under the coding element on the terminal
module.
-- Position of color identification labels: right next to each terminal on the
terminal box.
Tool required
3 mm screwdriver (for removal only)