Siemens SIMATIC ET 200S - Analog Electronic Modules; Introduction; Chapter overview

12-1
ET 200S Distributed I/O System
EWA-4NEB 780602402-12
Analog Electronic Modules
Introduction
The range of analog electronic modules (EM) includes modules for measuring
voltages and currents. HIGH SPEED modules can be used to measure voltages
and currents. HIGH FEATURE modules have greater resolution and precision.
Modules for connection to thermal elements and resistive thermometers or
resistors are also available.
The range is completed with modules for connection of loads and actuators to
current and voltage outputs.
Chapter overview
Chapter Topic Page
12.1 Analog value visualization 12-2
12.2 Basics of Analog Value Processing 12-17
12.3 Response of the Analog Modules during Operation
and if Faults Occur
12-26
12.4 Parameters for analog electronic modules 12-29
12.5 2AI U Standard analog electronic module
(6ES7 134-4FB00-0AB0)
12-42
12.6 2AI U High Feature analog electronic module
(6ES7 134-4LB00-0AB0)
12-46
12.7 2AI U High Speed analog electronic module
(6ES7 134-4FB51-0AB0)
12-50
12.8 2AI I 2WIRE analog electronic module (6ES7 134-4GB00-0AB0) 12-54
12.9 4AI I 2WIRE Standard analog electronic module
(6ES7 134-4GD00-0AB0)
12-58
12.10 2AI I 2WIRE High Speed analog electronic module
(6ES7 134-4GB51-0AB0)
12-62
12.11 2AI I 2WIRE Standard analog electronic module
(6ES7 134-4GB10-0AB0)
12-66
12.12 2AI I 2/4WIRE High Feature analog electronic module
(6ES7 134-4MB00-0AB0)
12-70
12.13 2AI I 4WIRE High Speed analog electronic module
(6ES7 134-4GB61-0AB0)
12-74
12.14 2AI RTD Standard analog electronic module
(6ES7 134-4JB50-0AB0)
12-78
12