Siemens SIMATIC ET 200S - Updating the firmware of the IM151-1 HIGH FEATURE

Interface Modules
8-22
ET 200S Distributed I/O System
EWA-4NEB 780602402-12
Updating the firmware of the IM151-1 HIGH FEATURE
Properties
• As of STEP 7 V5.1, ServicePack 3, you can update the firmware of the
IM151-1 HIGH FEATURE.
• To update the firmware you receive files (*.UPD) with the current firmware.
Prerequisites
• The IM151-1 HIGH FEATURE in the station whose firmware is to be updated
must be accessible online.
• The files with the current firmware version must be available in the file syst em
of your programming device or PC.
Procedure
The STEP 7 online help system provides information on how to proceed.
Note
We recommend you update the firmware using PROFIBUS DP.
Restrictions when operating the modules with the IM 151 HIGH FEATURE
The following modules cannot be used with the IM 151 HIGH FEATURE:
Module Up to order number Up to product
version
1Count 24V/100kHz 6ES7 138-4DA02-0AB0 1
1Count 5V/500kHz 6ES7 138-4DE00-0AB0 1
1SSI 6ES7 138-4DB00-0AB0 3
EM 1STEP 5V/204kHz 6ES7 138-4DC00-0AB0 3
1SI serial interface module 6ES7 138-4DF00-0AB0 1
Modbus/USS serial interface module 6ES7 138-4DF10-0AB0 1
2AIU;HIGHFEATURE 6ES7 134-4LB00-0AB0 1
2AI I 2 /4DMU; HIGH FEATURE 6ES7 134-4MB00-0AB0 1
2AO U; HIGH F EATURE 6ES7 135-4LB00-0AB0 1