Analog Electronic Modules
12-60
ET 200S Distributed I/O System
EWA-4NEB 780602402-12
Technical data
Dimensions and weight
Dimensions W x H x D
(mm)
15 x 81 x 52
Weight Approx. 40 g
Module-specific data
Supports clock synchro-
nized mode
No
Number of inputs 4
Cable length
•
shielded max. 200 m (164 ft)
Voltages, currents, electrical potentials
Rated load voltage L+ (from
power module)
24 VDC
•
Polarity reversal
protection
Yes
Transducer power supply Yes
•
Short-circuit protection Yes (approx.
200 mA for module)
Electrical isolation
•
Between channels and
backplane bus
Yes
•
Between channels and
load voltage L+
No
•
Between the channels No
Isolation tested 500 VDC
Power consumption of module
•
From load voltage L+
(with sensor power
supply)
max. 125 mA
Power loss of the module Typical 0.6 W
Status, interrupts, diagnostics
Diagnostic functions
•
Group error red LED ”SF”
•
Reading of diagnostics
functions
Yes
To Next Page
Loading...
