Siemens Sinumerik 840DiE sl - User-Specific HMI Start-Up Images

01/2007
5.4 Service Desktop
5-121
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
5.4.6 User–specific HMI start–up images
User–specific start–up images can be displayed while the HMI is booting. The
boot images must be stored in bitmap format (*.BMP) in a defined directory
structure.
The directory structure must be created under ”F:\OEM\IB\DATA” according to
the following schema:
S F:\OEM\IB\DATA\<NCK type>\<screen resolution>\<file name>.BMP
The different NCK types are displayed depending on the directory name.
The following values may be used as directory names for the SINUMERIK
840Di sl:
S default
If a directory: default is created, the start–up image stored in this directory
will always be displayed irrespective of the NCK type.
S 5000
Under directory: 5000 (ID for SINUMERIK 840Di sl) stored start–up images
are only displayed by the HMI application together with a SINUMERIK
840Di sl.
The start–up images for the various screen resolutions must be stored in differ-
ent directories. The directory name corresponds to the screen resolution:
S 640
start–up image for screen resolution: 640 x 480 [dpi]
S 800
start–up image for screen resolution: 800 x 600 [dpi]
S 1024
start–up image for screen resolution: 1024 x 768 [dpi]
Note
Directory: Screen resolution may only contain one
file.
You can choose any file name.
5.4.7 HMI Explorer
The HMI Explorer is used to manage the Siemens A&D software components
on the PCU. The following main functions are available:
– Version display
– Installation, de–installation, and re–installation
– Application–specific information (detailed information, history, available
language versions, etc.)
Directory structure
Parameters:
NCK type
Parameters:
Screen resolution
Parameters:
File name
5 Power On and Power–U
p