01/2007
6.3 Creating a SIMATIC S7 project
6-141
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
6.3.3 HW Config
The user interface of ”HW Config” mainly contains:
– Station window
The station window is split. The upper part displays the structure of the
station graphically, and the lower part provides a detailed view of the
selected module.
– Hardware catalog
If the hardware catalog is not displayed, open it using the menu com-
mand: View > Catalog.
HW Config – [SINUMERIK (configuration) –– SIN840Di sl]
DefaultProfile
:
Slot Designation
PROFIBUS DP
SIMATIC 300
SIMATIC PC–Based Control
SIMATIC PC Station
Station Edit Insert Target System View Tools Window Help
Stations window: Station structure
Stations window: Detailed view
Hardware catalog
SIMATIC 400
Search:
PROFIBUS PA
PROFINET IO
Fig. 6-4 HW Config: Names of the main areas
Note
To check whether a module selected from the hardware catalog complies with
the module in the automation system, the following procedure is
recommended:
1. Note the MLFB numbers of all modules used in the automation system.
2. Select the appropriate module from the hardware catalog and compare the
order number (MLFB) displayed with the noted MLFB number. The MLFB
numbers must be identical.
6 PLC Commissionin
To Next Page
Loading...
