01/2007
17.2 Assigning via Web License Manager
17-485
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
5. After completing the assignment process, enter the License Key displayed
on the Web License Manager into the licensing dialog of the HMI user inter-
face.
HMI Advanced/HMI Embedded:
Operating–area switchover: Commissioning > key: etc. (”>”) >
Licenses > Overview
6. Confirm the entry of the new License Key by pressing the softkey: ”Transfer”.
17.2.2 You can execute an assignment via customer login as follows
For the customer login, log on to a computer connected to the Internet (PC/PG)
with the user name and password in the Web License Manager. All licenses
released for this user name in the framework of the license management may
then be assigned to a piece of hardware. After completing the assignment pro-
cess, the new License Key is displayed. This must then be entered in the li-
censing dialog of the HMI components used.
The following prerequisites must be met in order to assign a license to a piece
of hardware via customer login and HMI user interface:
S The HMI component is connected with the control system (NCU) on which
the license should be assigned. Both components have been booted.
S A computer (PC/PG) with Internet connection and browser is available.
S The login data for the customer login is available:
– User name
– Password
Assigning a license to a piece of hardware:
1. Determine the HW serial number and the product name (HMI Advanced/HMI
Embedded: ”Type of hardware”) via the HMI Licensing dialog box.
HMI Advanced/HMI Embedded:
Operating–area switchover: Commissioning > key: etc. (”>”) >
Licenses > Overview
Note
Ensure that the hardware serial number displayed is also really the one you
want to make the assignment for. The assignment of a license to a piece of
hardware cannot be reversed via the Web License Manager.
Background
Requirements
Execution
17 License Mana
ement
To Next Page
Loading...
