Siemens Sinumerik 840DiE sl - SINUMERIK Industrial PC

01/2007
2.5 SINUMERIK Industrial PC
2-66
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
2.5 SINUMERIK Industrial PC
2.5.1 SINUMERIK PCU 50.3
*) Orientation with reference
to operation with OP 012
top
*)
**) Fixing screws
Housing cover
**)
**)
Fig. 2-13 PCU 50.3: Perspective view with installed hard disk drive
PCU as spare part with MCI board:
Designation Order No. (MLFB)
with Windows XP ProEmbSys and MCI board:
PCU 50.3–C/1.5 GHz, 512 MB SDRAM 6FC5 220–0AA31–2AA0
PCU 50.3–P/2.0 GHz, 1024 MB SDRAM 6FC5 220–0AA33–2AA0
The SINUMERIK industrial PC ”PCU 50.3” provides, together with the MCI
board, the basis for the SINUMERIK 840Di sl. The PCU 50.3 has the following
important features:
S Versions:
– Celeron M, 1.5 GHz, 512 MB SDRAM
– Pentium M, 2.0 GHz, 1024 MB SDRAM
S Hard disk min. 40 GB (replaceable)
S Operating system Windows XP ProEmbSys with Service Pack 2
S Robust design (continuous operation, high noise immunity)
S Compact dimensions for space–saving installation
S Easy installation with four screws on the rear of the operator panel front
Order number
Features
2 Hardware Descri
p
tions